Page:display:analysis:interpolate - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Parameter
Query response
Example
SCPI Commands

:PAGE:DISPlay:ANALysis:INTerpolate

:PAGE:DISPlay:ANALysis:INTerpolate
This command selects whether interpolation mode of marker is on or off.
At *RST, this value is OFF.
:PAGE:DISPlay:ANALysis:INTerpolate OFF | ON | 0 | 1
Parameter Type
OFF or 0 boolean
ON or 1 boolean
0 | 1 <newline><^END>
OUTPUT @Hp4155;":PAGE:DISP:ANAL:INT ON"
OUTPUT @Hp4155;":PAGE:DISP:ANAL:INT?"
ENTER @Hp4155;A
:PAGE:DISPlay:ANALysis:LINE(1|2):ASELect
This command selects whether the Y axis is Y1 or Y2.
At *RST, this value is Y1.
:PAGE:DISPlay:ANALysis:LINE(1 | 2):ASELect Y1 | Y2
Parameter Type
Y1 character
Y2 character
Y1 | Y2 <newline><^END>
OUTPUT @Hp4155;":PAGE:DISP:ANAL:LINE1:ASEL Y1"
OUTPUT @Hp4155;":PAGE:DISP:ANAL:LINE1:ASEL?"
ENTER @Hp4155;A$
5-110 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
interpolation is off
interpolation is on
Explanation
y axis is Y1
y axis is Y2