Syntax
Parameter
Query response
Example
:FORMat:BORDer
This command controls whether binary data is transferred in normal or swapped
byte order. To set up binary data transfer, you must specify REAL in the
:FORMat[:DATA] command.
At *RST, this value is set to NORMal.
:FORMat:BORDer NORMal | SWAPped
Parameter
Type
NORMal
character
SWAPped
character
NORM | SWAP <newline><^END>
OUTPUT @Hp4155;":FORM:BORD NORM"
OUTPUT @Hp4155;":FORM:BORD?"
ENTER @Hp4155;A$
Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
Normal byte order.
Swapped byte order.
SCPI Commands
:FORMat:BORDer
5-31