Page:glist:list:marker:skip - Agilent Technologies 4155C Command Reference Manual

Syntax
Example
Syntax
Parameter
Query response
Example
Syntax
Example

:PAGE:GLISt:LIST:MARKer:SKIP

This command skips the marker to the next VAR2 value or to the next appended
data.
This command does not have query form.
:PAGE:GLISt:LIST:MARKer:SKIP
OUTPUT @Hp4155;":PAGE:GLISt:LIST:MARK:SKIP"
:PAGE:GLISt:LIST:MARKer[:STATe]
This command selects whether the marker is on or off.
At *RST, this value is OFF.
:PAGE:GLISt:LIST:MARKer [ :STATe] OFF | ON | 0 | 1
Parameter Type
OFF or 0 boolean
ON or 1 boolean
0 | 1 <newline><^END>
OUTPUT @Hp4155;":PAGE:GLISt:LIST:MARK ON"
OUTPUT @Hp4155;":PAGE:GLISt:LIST:MARK?"
ENTER @Hp4155;A
:PAGE:GLISt:LIST[:MENU]
This command changes the present display page to GRAPH/LIST: LIST page.
This command does not have query form.
:PAGE:GLISt:LIST [ :MENU]
OUTPUT @Hp4155;":PAGE:GLIS:LIST"
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:PAGE:GLISt:LIST:MARKer:SKIP
Explanation
marker is off
marker is on
SCPI Commands
5-147