Figure 1-7
Figure 1-8
Functional Syntax Conventions
Parameter Types
Arbitrary Block Parameter
An arbitrary block parameter type is used for binary data transmission and defined
as follows:
Definite Length Arbitrary Block Parameter
The single decimal digit <non-zero> digit specifies how many <digit>s will follow.
The decimal number <digit>s specifies how many <8-bit data byte>s will follow.
Indefinite Length Arbitrary Block Parameter
For indefinite length data, use zero 0 digit as shown above.
1-10
Agilent 4155C/4156C SCPI Command Reference, Edition 1