System:communicate:network[:Self]:Name - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
SCPI Commands

:SYSTem:COMMunicate:NETwork[:SELF]:NAME

:SYSTem:COMMunicate:NETwork[:SELF]:NAME
This command is one of the commands to register the 4155C/4156C network setup.
To register the 4155C/4156C network setup, enter the following commands:
• :SYSTem:COMMunicate:NETwork[:SELF]:NAME
• :SYSTem:COMMunicate:NETwork[:SELF]:IPADdress
• :SYSTem:COMMunicate:NETwork[:SELF]:USERid
• :SYSTem:COMMunicate:NETwork[:SELF]:GROUpid
This command sets the host name assigned to the 4155C/4156C.
*RST has no effect on the value of this parameter. Query returns the present setting.
:SYSTem:COMMunicate:NETwork [ :SELF] :NAME name
Parameter Type
name string
host_name <newline><^END>
OUTPUT @Hp4155;":SYST:COMM:NET:SELF:NAME 'analyzer1'"
OUTPUT @Hp4155;":SYST:COMM:NET:SELF:NAME?"
ENTER @Hp4155;A$
5-318 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
Host name for the 4155C/4156C. Maximum 15
characters.