Page:display:analysis:line(1|2):Point(1|2):Mode - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Parameter
SCPI Commands

:PAGE:DISPlay:ANALysis:LINE(1|2):POINt(1|2):MODE

:PAGE:DISPlay:ANALysis:LINE(1|2):POINt(1|2):MO
DE
This command selects the point specification mode for line.
If LINE(1|2):MODE is TANGent, then POINt(1|2) are not used.
If LINE(1|2):MODE is GRADient, then POINt2 is not used.
At *RST, this value is XY.
:PAGE:DISPlay:ANALysis:LINE(1 | 2):POINt(1 | 2):MODE XY | OPLot
Parameter Type
XY character
OPLot character
XY | OPL <newline><^END>
OUTPUT @Hp4155;":PAGE:DISP:ANAL:LINE1:POIN1:MODE XY"
OUTPUT @Hp4155;":PAGE:DISP:ANAL:LINE1:POIN1:MODE?"
ENTER @Hp4155;A$
:PAGE:DISPlay:ANALysis:LINE(1|2):POINt(1|2)
:POSition
This command specifies the desired point by using a condition expression.
If POINt(1|2):MODE is XY (not OPLot), this parameter is ignored.
At *RST, this value is undefined.
:PAGE:DISPlay:ANALysis:LINE(1 | 2):POINt(1 | 2):POSition var_name, expr
Parameter Type
var_name string
expr string
5-114 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
specify the X-Y coordinates directly
specify by a condition expression
Explanation
data variable name
condition expression