Page:measure:sampling:constant:vsu<N>[:Source] - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
SCPI Commands
:PAGE:MEASure:SAMPling:CONStant:VSU<n>[:SOURce]
:PAGE:MEASure:SAMPling:CONStant:VSU<n>[:SOU
Rce]
This command sets the constant SOURCE value of VSU<n> for the sampling
measurement.
<n> is required to specify VSU number. Valid VSU numbers are VSU1 through
VSU2.
The specified VSU must not be DISable.
:PAGE:MEASure:SAMPling:CONStant:VSU<n> [ :SOURce] source | MINimum |
MAXimum
Parameter Type
source numeric
source <newline><^END>
source is NR3 response data type.
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:CONS:VSU1 10"
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:CONS:VSU1 MAX"
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:CONS:VSU1?"
ENTER @Hp4155;A
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:CONS:VSU1? MAX"
ENTER @Hp4155;A
5-210 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
-20 V to 20 V