Display[:Window][:State] - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Remarks
Example

:DISPlay[:WINDow][:STATe]

This command controls whether the instrument screen is updated or not.
AT *RST, this value is ON.
:DISPlay[ :WINDow] [ :STATe] OFF | ON | 0 | 1
Parameter Type
OFF or 0 boolean
ON or 1 boolean
0 | 1 <newline><^END>
The :DISP OFF (or 0) command is not available when the 4155C/4156C screen
displays the following page:
• SYSTEM: FILER
• SYSTEM: MISCELLANEOUS
• SYSTEM: CONFIGURATION
• SYSTEM: SELF-CALIBRATION/DIAGNOSTICS
• SYSTEM: PRINT/PLOT SETUP
• SYSTEM: COLOR SETUP
• KNOB SWEEP
To enter the following command, the 4155C/4156C screen must be set to the update
enable state.
• :PAGE:KSWeep command group
• :PAGE:SCONtrol:KSWeep[:STARt] command
• :DIAGnostic:TEST[:EXECute] test_no command (test_no: 201 to 413)
OUTPUT @Hp4155;":DISP ON"
OUTPUT @Hp4155;":DISP?"
ENTER @Hp4155;A
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:DISPlay[:WINDow][:STATe]
Explanation
screen is not updated
screen is updated (update enable state)
SCPI Commands
5-29