System:communicate:network:filer:net:directory - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
SCPI Commands

:SYSTem:COMMunicate:NETwork:FILEr:NET:DIRectory

:SYSTem:COMMunicate:NETwork:FILEr:NET:DIRec
tory
This command is one of the commands to register the network drive setup. To
register a setup, the following commands must be entered:
• :SYSTem:COMMunicate:NETwork:FILEr:NET:NAME
• :SYSTem:COMMunicate:NETwork:FILEr:NET:IPADdress
• :SYSTem:COMMunicate:NETwork:FILEr:NET:DIRectory
• :SYSTem:COMMunicate:NETwork:FILEr:SET
You can register maximum 4 setups.
This command specifies the directory on the NFS server mounted by the
4155C/4156C. The directory is the root directory for the 4155C/4156C.
Confirm that the NFS server exports the directory for the 4155C/4156C.
If you do not enter the :SYST:COMM:NET:FILE:SET command, *RST clears this
setting. Query returns the present setting.
:SYSTem:COMMunicate:NETwork:FILEr:NET:DIRectory directory
Parameter Type
directory string
directory <newline><^END>
OUTPUT @Hp4155;":SYST:COMM:NET:FILE:NET:DIR '/TEST/SETUP
'"
OUTPUT @Hp4155;":SYST:COMM:NET:FILE:NET:DIR?"
ENTER @Hp4155;A$
5-304 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
Directoy mounted by the 4155C/4156C