Hcopy:page:column - Agilent Technologies 4155C Command Reference Manual

Parameter
Query response
Example
Syntax
Parameter
Query response
Example
See also
Parameter Type
CURR character
GRO character
ALL character
CURR | GRO | ALL <newline><^END>
OUTPUT @Hp4155;":HCOP:OPAG CURR"
OUTPUT @Hp4155;":HCOP:OPAG?"
ENTER @Hp4155;A$

:HCOPy:PAGE:COLumn

This command sets the number of characters (columns) in one line of the print out.
At *RST, the value of this parameter is 80.
:HCOPy:PAGE:COLumn column
Parameter Type
column numeric
column <newline><^END>
The data type of column is NR1 response data.
OUTPUT @Hp4155;":HCOP:PAGE:COL 80"
OUTPUT @Hp4155;":HCOP:PAGE:COL?"
ENTER @Hp4155;A
:HCOPy:DEVice:LANGuage
Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
setup data of only the page where the print/plot
function is invoked.
setup data of the page group where the print/plot
function is invoked.
all setup data.
Explanation
number of characters in a line.
SCPI Commands
:HCOPy:PAGE:COLumn
5-53