Page:stress[:Cdefinition]:Smu<N>:Function - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
:PAGE:STRess[:CDEFinition]:SMU<n>:FUNCtion
This command sets the function (FCTN) of SMU<n> for stress.
<n> is required to specify SMU number. Valid SMU numbers are SMU1 through
SMU6, depending on the configuration.
At *RST, this value is:
SMU1
SMU2 to 4
SMU5 and SMU6
:PAGE:STRess [ :CDEFinition] :SMU<n>:FUNCtion SYNC | NSYNc
Parameter Type
SYNC character
NSYNc character
SYNC | NSYN | DIS <newline><^END>
If SMU is not used, the response data may be DIS (DISable).
OUTPUT @Hp4155;":PAGE:STR:SMU1:FUNC SYNC"
OUTPUT @Hp4155;":PAGE:STR:SMU1:FUNC?"
ENTER @Hp4155;A$
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:PAGE:STRess[:CDEFinition]:SMU<n>:FUNCtion
SMU FUNCTION
NSYNC
SYNC
not defined
Explanation
synchronous stress output
non-synchronous (non-stress output)
SCPI Commands
5-257