Page:glist[:Graphics]:Line:mode - Agilent Technologies 4155C Command Reference Manual

Query response
Example
Syntax
Parameter
Query response
Example
Syntax
Example
SCPI Commands

:PAGE:GLISt[:GRAPhics]:LINE:MODE

line_number <newline><^END>
OUTPUT @Hp4155;":PAGE:GLIS:LINE:LSEL 1"
OUTPUT @Hp4155;":PAGE:GLIS:LINE:LSEL?"
ENTER @Hp4155;A
:PAGE:GLISt[:GRAPhics]:LINE:MODE
This command selects the line mode.
Although this value is not defined at *RST, if you select the line to operate on by
using :PAGE:GLISt[:GRAPhics]:LINE:LSELect, this value is set to NORM.
:PAGE:GLISt [ :GRAPhics] :LINE:MODE NORMal | GRADient | TANGent |
REGRession
Parameter
NORMal character
GRADient character
TANGent character
REGRession character
NORM | GRAD | TANG | REGR <newline><^END>
OUTPUT @Hp4155;":PAGE:GLIS:LINE:MODE GRAD"
OUTPUT @Hp4155;":PAGE:GLIS:LINE:MODE?"
ENTER @Hp4155;A$
:PAGE:GLISt[:GRAPhics]:LINE:SCURsor
This command toggles which cursor you want to operate on.
This command does not have query form.
:PAGE:GLISt [ :GRAPhics] :LINE:SCURsor
OUTPUT @Hp4155;":PAGE:GLIS:LINE:SCUR"
5-140 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Type
normal mode
gradient mode
tangent mode
regression mode
Explanation