Page:stress[:Cdefinition]:Pgu<N>:Mode - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Parameter
SCPI Commands
:PAGE:STRess[:CDEFinition]:PGU<n>:MODE
:PAGE:STRess[:CDEFinition]:PGU<n>:MODE
This command sets the output MODE of PGU<n> for stress.
<n> is required to specify PGU number. Valid PGU numbers are PGU1 through
PGU2.
At *RST, this value is not defined.
:PAGE:STRess [ :CDEFinition] :PGU<n>:MODE V | VPULse
Parameter Type
V character
VPULse character
V | VPUL | DIS <newline><^END>
If PGU is not used, the response data may be DIS (DISable).
OUTPUT @Hp4155;":PAGE:STR:PGU1:MODE V"
OUTPUT @Hp4155;":PAGE:STR:PGU1:MODE?"
ENTER @Hp4155;A$
:PAGE:STRess[:CDEFinition]:PGU<n>:NAME
This command sets the NAME of PGU<n> for stress.
<n> is required to specify PGU number. Valid PGU numbers are PGU1 through
PGU2.
At *RST, this value is not defined.
:PAGE:STRess [ :CDEFinition] :PGU<n>:NAME name
Parameter Type
name string
5-254 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
voltage output mode
voltage pulse output mode
Explanation
String of up to 6 alphanumeric characters.
1st character must be alphabet.