Page:glist[:Graphics]:Scaling:cancel - Agilent Technologies 4155C Command Reference Manual

Syntax
Example
Syntax
Example
Syntax
Example
SCPI Commands

:PAGE:GLISt[:GRAPhics]:SCALing:CANCel

:PAGE:GLISt[:GRAPhics]:SCALing:CANCel
This command redraws the plotting area with the "original settings".
"Original settings" means the most recent settings of the DISPLAY: DISPLAY
SETUP page or RE-SETUP GRAPH secondary softkey.
This command does not have query form.
:PAGE:GLISt [ :GRAPhics] :SCALing:CANCel
OUTPUT @Hp4155;":PAGE:GLIS:SCAL:CANC"
:PAGE:GLISt[:GRAPhics]:SCALing:CENTer
This command redraws the graphic display so that it is centered around the present
cursor position.
This command does not have query form.
:PAGE:GLISt [ :GRAPhics] :SCALing:CENTer
OUTPUT @Hp4155;":PAGE:GLIS:SCAL:CENT"
:PAGE:GLISt[:GRAPhics]:SCALing:CTMarker
This command moves the cursor to the marker's position.
This command does not have query form.
:PAGE:GLISt [ :GRAPhics] :SCALing:CTMarker
OUTPUT @Hp4155;":PAGE:GLIS:SCAL:CTM"
5-144 Agilent 4155C/4156C SCPI Command Reference, Edition 1