Page:channels[:Cdefinition]:Smu<N>:Vname - Agilent Technologies 4155C Command Reference Manual

Parameter
Query response
Example
Syntax
Parameter
Query response
Example
Parameter Type
OFF or 0 boolean
ON or 1 boolean
0 | 1 <newline><^END>
OUTPUT @Hp4155;":PAGE:CHAN:SMU1:STANDBY ON"
OUTPUT @Hp4155;":PAGE:CHAN:SMU1:STANDBY?"
ENTER @Hp4155;A
:PAGE:CHANnels[:CDEFinition]:SMU<n>:VNAMe
This command sets the VNAME of SMU<n>.
<n> is required to specify SMU number. Valid SMU numbers are SMU1 through
SMU6, depending on the configuration.
At *RST, this value is:
SMU1 through SMU4
SMU5 and SMU6
:PAGE:CHANnels [ :CDEFinition] :SMU<n>:VNAMe name
Parameter Type
name string
name <newline><^END>
name is string response data, but does not contain double quote characters at the
beginning and end of the string.
OUTPUT @Hp4155;":PAGE:CHAN:SMU1:VNAME 'VD'"
OUTPUT @Hp4155;":PAGE:CHAN:SMU1:VNAME?"
ENTER @Hp4155;A$
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:PAGE:CHANnels[:CDEFinition]:SMU<n>:VNAMe
Explanation
standby function is OFF
standby function is ON
SMU
Explanation
String of up to 6 alphanumeric characters.
1 st character must be alphabet.
SCPI Commands
VNAME
V<n>
not defined
5-93