Hcopy[:Immediate]; Hcopy:init - Agilent Technologies 4155C Command Reference Manual

Query response
Example
Syntax
Example
Syntax
Parameter
Query response
Example
resolution <newline><^END>
The data type of resolution is NR1 response data.
OUTPUT @Hp4155;":HCOP:DEV:RES 75"
OUTPUT @Hp4155;":HCOP:DEV:RES?"
ENTER @Hp4155;A

:HCOPy[:IMMediate]

This command immediately initiates the plot or print according to the current setup.
The output items to be plotted or printed out are the items selected by the
:HCOPy:ITEM subsystem commands.
This command does not have query form.
:HCOPy [ :IMMediate]
OUTPUT @Hp4155;":HCOP"

:HCOPy:INIT

This command sets INIT STRING, which are initialization commands you want to
send to the printer or plotter.
At *RST, this value is set to the empty string.
:HCOPy:INIT init_string
Parameter Type
init_string string
You can specify non-printable ASCII characters by a backslash and octal code
(ASCII code). For example, \033 specifies the <ESC> character.
init_string <newline><^END>
OUTPUT @Hp4155;":HCOP:INIT '\033E'"
OUTPUT @Hp4155;":HCOP:INIT?"
ENTER @Hp4155;A$
Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
initialization commands
SCPI Commands
:HCOPy[:IMMediate]
5-41