Page:measure:qscv:var1:Mode - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example

:PAGE:MEASure:QSCV:VAR1:MODE

This command sets the VAR1 sweep mode for Quasi-static CV measurements. This
command also has a query form.
At *RST, this value is set to SING
:PAGE:MEASure:QSCV:VAR1:MODE SINGle | DOUBle
:PAGE:MEASure:QSCV:VAR1:MODE?
Parameter Type
SINGle character
DOUBle character
SING | DOUB <newline><^END>
OUTPUT @Hp4155;":PAGE:MEAS:QSCV:VAR1:MODE SING"
OUTPUT @Hp4155;":PAGE:MEAS:QSCV:VAR1:MODE?"
ENTER @Hp4155;A$
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:PAGE:MEASure:QSCV:VAR1:MODE
Explanation
Single mode (start to stop)
Double mode (start to stop to start)
SCPI Commands
5-203