System:language - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Example
Syntax
Parameter
Query response
Example

:SYSTem:LANGuage

This command performs reset, then switches the remote command language from
the 4155/4156 (SCPI) to the 4145B syntax commands mode.
After switching the language to the 4145B syntax commands mode, only the *RST
command can switch the language back to SCPI mode.
This command does not have query form.
At *RST, the remote command language is SCPI.
:SYSTem:LANGuage COMPatibility
Parameter Type
COMPatibility character
OUTPUT @Hp4155;":SYST:LANG COMP"
:SYSTem:LFRequency
This command sets or queries the value that is set for the power line frequency
(reference frequency). *RST has no effect on the value of this parameter.
:SYSTem:LFRequency frequency
Parameter Type
frequency numeric
''HZ'' suffix can be used after frequency.
frequency <newline><^END>
frequency is NR3 response data.
OUTPUT @Hp4155;":SYST:LFR 50"
OUTPUT @Hp4155;":SYST:LFR 50HZ"
Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
4145B syntax commands
Explanation
50 or 60 (Hz)
SCPI Commands
:SYSTem:LANGuage
5-325