Mmemory:move - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Example
SCPI Commands

:MMEMory:MOVE

:MMEMory:MOVE
This command moves (renames) an existing file to another file name.
Both the source and destination files must be on the device specified by the
:MMEM:DEST command.
If the specified source file does not exist, error -256 "File name not found" will be
generated.
If the specified destination file already exists, error -257 "File name error" will be
generated.
This command does not have query form.
:MMEMory:MOVE src_file , dest_file
or
:MMEMory:MOVE src_file , src_msus , dest_file , dest_msus
Parameter Type
src_file string
dest_file string
src_msus string
dest_msus string
The following two examples produce the same result.
OUTPUT @Hp4155;":MMEM:MOVE 'CMOS.MES','CMOS2.MES'"
OUTPUT @Hp4155;":MMEM:MOVE 'CMOS.MES','DISK','CMOS2.MES','DISK'"
5-72 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
source file name including extension
destination file name including extension
source mass storage (Only 'DISK' can be set as the
value)
destination mass storage (Only 'DISK' can be set
as the value)