Mmemory:copy - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Example

:MMEMory:COPY

This command copies an existing file to a new file.
If the source file doesn't exist or the destination file already exists, an error is
generated.
This command does not have query form.
• Syntax 1:
:MMEMory:COPY src_file, dest_file
• Syntax 2:
:MMEMory:COPY src_file, src_msus, dest_file, dest_msus
Parameter Type
src_file string
dest_file string
src_msus string
dest_msus string
The default mass storage is the device specified by :MMEM:DEST command. You
must specify file extension with the file name. To specify the device, set src_msus
and/or dest_msus to 'DISK', or use Syntax 1.
If you copy an internal memory data, set src_msus and/or dest_msus to 'MEMORY'.
The extension is optional, so file name can be MEM1, MEM2, MEM3, or MEM4 or with
applicable file type extension (MES, STR, DAT, or MAT).
To copy a file to another file on the default device:
OUTPUT @Hp4155;":MMEM:COPY 'CMOS.MES','CMOS2.MES'"
To copy an internal memory data to a file in the default device:
OUTPUT @Hp4155;":MMEM:COPY 'MEM3.MES','MEMORY','CMOS.MES','DISK'"
To copy an internal memory data to another internal memory:
OUTPUT @Hp4155;":MMEM:COPY 'MEM3.MES','MEMORY','MEM4','MEMORY'"
Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
source file name including extension
destination file name including extension
source mass storage ('DISK' or 'MEMORY' is
available)
destination mass storage ('DISK' or 'MEMORY' is
available)
SCPI Commands
:MMEMory:COPY
5-65