System:communicate:network:filer:net:name - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
SCPI Commands

:SYSTem:COMMunicate:NETwork:FILEr:NET:NAME

:SYSTem:COMMunicate:NETwork:FILEr:NET:NAM
E
This command is one of the commands to register the network drive setup. To
register a setup, the following commands must be entered:
• :SYSTem:COMMunicate:NETwork:FILEr:NET:NAME
• :SYSTem:COMMunicate:NETwork:FILEr:NET:IPADdress
• :SYSTem:COMMunicate:NETwork:FILEr:NET:DIRectory
• :SYSTem:COMMunicate:NETwork:FILEr:SET
You can register maximum 4 setups.
This command sets the label or name for the network drive setup.
If you do not enter the :SYST:COMM:NET:FILE:SET command, *RST clears this
setting. Query returns the present setting.
:SYSTem:COMMunicate:NETwork:FILEr:NET:NAME name
Parameter Type
name string
hostname <newline><^END>
OUTPUT @Hp4155;":SYST:COMM:NET:FILE:NET:NAME 'mydir1'"
OUTPUT @Hp4155;":SYST:COMM:NET:FILE:NET:NAME?"
ENTER @Hp4155;A$
5-306 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
Label or name for the network drive setup.
Maximum 15 characters.