Hcopy:page:fdirection; Hcopy:page:length - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Parameter
Query response
SCPI Commands

:HCOPy:PAGE:FDIRection

:HCOPy:PAGE:FDIRection
This command sets the direction of the paper-feed into the plotter.
At *RST, the value of this parameter is SSIDe.
:HCOPy:PAGE:FDIRection SSIDe | LSIDe
Parameter Type
SSIDe character
LSIDe character
SSID | LSID <newline><^END>
OUTPUT @Hp4155;":HCOP:PAGE:FDIR SSID"
OUTPUT @Hp4155;":HCOP:PAGE:FDIR?"
ENTER @Hp4155;A$

:HCOPy:PAGE:LENGth

This command sets the vertical length of the paper.
Unit of length is set by :HCOPy:PAGE:UNIT command.
At *RST, the value of this parameter is set to 11 inch.
:HCOPy:PAGE:LENGth length | MINimum | MAXimum
Explanati
Parameter
on
length numeric
length <newline><^END>
The data type of length is NR3 response data.
5-56 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
Direction is shorter side of the paper
Direction is longer side of the paper
vertical length of the paper
7 to 20 (inch) or 177.793 to 507.98 (mm)