Hcopy:page:width - Agilent Technologies 4155C Command Reference Manual

Parameter
Query response
Example
See also
Syntax
Parameter
Query response
Example
See also
Parameter Type
IN character
MM character
IN | MM <newline><^END>
OUTPUT @Hp4155;":HCOP:PAGE:UNIT IN"
OUTPUT @Hp4155;":HCOP:PAGE:UNIT?"
ENTER @Hp4155;A$
:HCOPy:PAGE:LENGth, :HCOPy:PAGE:WIDTh

:HCOPy:PAGE:WIDTh

This command sets the horizontal width of the paper.
Unit of width is set by :HCOPy:PAGE:UNIT command.
At *RST, the value of this parameter is set to 8.5 inch.
:HCOPy:PAGE:WIDTh width
Parameter Type
width numeric
width <newline><^END>
The data type of width is NR3 response data.
OUTPUT @Hp4155;":HCOP:PAGE:WIDT 10"
OUTPUT @Hp4155;":HCOP:PAGE:WIDT?"
ENTER @Hp4155;A
:HCOPy:PAGE:UNIT
Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
inch
millimeter
Explanation
width of the paper
SCPI Commands
:HCOPy:PAGE:WIDTh
5-59