Page:display:analysis:marker:disable - Agilent Technologies 4155C Command Reference Manual

Syntax
Example
Syntax
Parameter
Query response
Example
SCPI Commands

:PAGE:DISPlay:ANALysis:MARKer:DISable

:PAGE:DISPlay:ANALysis:MARKer:DISable
This command clears the marker settings.
This command does not have query form.
:PAGE:DISPlay:ANALysis:MARKer:DISable
OUTPUT @Hp4155;":PAGE:DISP:ANAL:MARK:DIS"
:PAGE:DISPlay:ANALysis:MARKer:POSition
This command specifies the marker's position by using a condition expression.
At *RST, this value is undefined.
:PAGE:DISPlay:ANALysis:MARKer:POSition var_name, expr
Parameter Type
var_name string
expr string
var_name, expr <newline><^END>
var_name and expr are string response data, but do not contain double quote
characters at the beginning and end.
OUTPUT @Hp4155;":PAGE:DISP:ANAL:MARK:POS 'DGM','MAX(DGM)
*0.01'"
OUTPUT @Hp4155;":PAGE:DISP:ANAL:MARK:POS?"
ENTER @Hp4155;A$
5-120 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
data variable name
condition expression