System:communicate:network:printer:net:name - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
:SYSTem:COMMunicate:NETwork:PRINter:NET:NA
ME
This command is one of the commands to register the network printer setup. To
register a printer setup, the following commands must be entered:
•

:SYSTem:COMMunicate:NETwork:PRINter:NET:NAME

• :SYSTem:COMMunicate:NETwork:PRINter:NET:IPADdress
• :SYSTem:COMMunicate:NETwork:PRINter:NET:TEXToption
• :SYSTem:COMMunicate:NETwork:PRINter:NET:GRAPhoption
• :SYSTem:COMMunicate:NETwork:PRINter:NET:TYPE
• :SYSTem:COMMunicate:NETwork:PRINter:SET
You can register maximum 4 setups.
This command sets the printer name assigned to the remote printer, and defined on
the print server.
If you do not enter the :SYST:COMM:NET:PRIN:SET command, *RST clears this
setting. Query returns the present setting.
:SYSTem:COMMunicate:NETwork:PRINter:NET:NAME name
Parameter Type
name string
printer_name <newline><^END>
OUTPUT @Hp4155;":SYST:COMM:NET:PRIN:NET:NAME 'printer1'"
OUTPUT @Hp4155;":SYST:COMM:NET:PRIN:NET:NAME?"
ENTER @Hp4155;A$
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:SYSTem:COMMunicate:NETwork:PRINter:NET:NAME
Printer name assigned to the printer. Maximum 15
characters. The name must be defined on the print
server.
SCPI Commands
Explanation
5-311