Page:display:analysis:line(1|2):Point(1|2):X - Agilent Technologies 4155C Command Reference Manual

Query response
Example
Syntax
Parameter
Query response
Example
var_name, expr <newline><^END>
var_name and expr are string response data, but do not contain double quote
characters at the beginning and end.
OUTPUT @Hp4155;":PAGE:DISP:ANAL:LINE1:POIN1:POS 'DGM','M
AX(DGM)*0.01'"
OUTPUT @Hp4155;":PAGE:DISP:ANAL:LINE1:POIN1:POS?"
ENTER @Hp4155;A$

:PAGE:DISPlay:ANALysis:LINE(1|2):POINt(1|2):X

This command specifies the X coordinate of the desired point.
If POINt(1|2):MODE is OPLot (not XY), this parameter is ignored.
At *RST, this value is undefined.
:PAGE:DISPlay:ANALysis:LINE(1|2):POINt(1|2):X x_expression
Parameter Type
x_expression string
x_value <newline><^END>
x_value is string response data, but do not contain double quote characters at
beginning and end of the string.
OUTPUT @Hp4155;":PAGE:DISP:ANAL:LINE1:POIN1:X '0.5'"
OUTPUT @Hp4155;":PAGE:DISP:ANAL:LINE1:POIN1:X?"
ENTER @Hp4155;A$
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:PAGE:DISPlay:ANALysis:LINE(1|2):POINt(1|2):X
Explanation
expression of the X coordinate point
SCPI Commands
5-115