Page:stress[:Cdefinition]:Selector<N>:Stress - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Example
SCPI Commands
:PAGE:STRess[:CDEFinition]:SELector<n>:STRess
:PAGE:STRess[:CDEFinition]:SELector<n>:STRess
This command selects the relay connection mode of Agilent 16440A SMU/PGU
selector n for stress state.
<n> is required to specify the SMU/PGU selector number. Valid SMU/PGU selector
numbers are SELector1 through SELector4.
At *RST, this value is OPEN.
:PAGE:STRess [ :CDEFinition] :SELector<n>:STRess SMU | PGU | OPEN |
POPen
Parameter Type
SMU character
PGU character
OPEN character
POPen character
SMU | PGU | OPEN | POP <newline><^END>
OUTPUT @Hp4155;":PAGE:STR:SEL1:STR SMU"
OUTPUT @Hp4155;":PAGE:STR:SEL1:STR?"
ENTER @Hp4155;A$
:PAGE:STRess[:CDEFinition]:SMU<n>:DISable
This command deletes the stress settings of SMU<n>.
<n> is required to specify SMU number. Valid SMU numbers are SMU1 through
SMU6, depending on the configuration.
This command does not have query form.
:PAGE:STRess [ :CDEFinition] :SMU<n>:DISable
OUTPUT @Hp4155;":PAGE:STR:SMU1:DIS"
5-256 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
connect to SMU port
connect to PGU port
disconnect all
disconnect all, but disconnect PGU port with
semiconductor switch, not normal switch. This
parameter is valid only for selector 1 and 3.