Syntax
Parameter
Query response
Example
Syntax
Parameter
Query response
Example
SCPI Commands
:PAGE:GLISt[:GRAPhics]:CURSor[:STATe]
At *RST, this value is undefined.
:PAGE:GLISt [ :GRAPhics] :CURSor:DIRect:X|:Y1|:Y2 value
Parameter
Type
value
numeric
value <newline><^END>
value is NR3 response data type.
OUTPUT @Hp4155;":PAGE:GLIS:CURS:DIR:X 0.5"
OUTPUT @Hp4155;":PAGE:GLIS:CURS:DIR:X?"
ENTER @Hp4155;A
:PAGE:GLISt[:GRAPhics]:CURSor[:STATe]
This command sets the state of cursor.
At *RST, this value is OFF.
:PAGE:GLISt [ :GRAPhics] :CURSor [ :STATe] OFF | SHORt | LONG
Parameter
Type
OFF
character
SHORt
character
LONG
character
OFF | SHORt | LONG <newline><^END>
OUTPUT @Hp4155;":PAGE:GLIS:CURS LONG"
OUTPUT @Hp4155;":PAGE:GLIS:CURS?"
ENTER @Hp4155;A$
5-134
Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
x, y1, or y2 coordinate value
Explanation
cursor is off
short cursor is on
long cursor is on