Page:ksw Commands - Agilent Technologies 4155C Command Reference Manual

SCPI Commands

:PAGE:KSW Commands

:PAGE:KSW commands set the KNOB SWEEP page. These commands are not
available when the 4155C/4156C screen is set to the update disable state by :DISP
OFF (or 0) command. To use :PAGE:KSW commands, enter :DISP ON (or 1)
command.
Command
:PAGE
:KSWeep
:CURSor
:X
:Y
:DISPlay
:DIRection
:X
:Y
:GRID
:REGion
:X
:Y
[:MENU]
:SCOPy
:VAR1
:EXTent
:MODE
:POLarity
:POINts
:RANGe
:STIMe
:Y
5-148 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Parameter
<numeric_value>
<numeric_value>
NORMal | REVerse
NORMal | REVerse
0 | 1 | OFF | ON
POSitive | NEGative | BIPolar
POSitive | NEGative | BIPolar
<numeric_value>
SINGle | DOUBle
POSitive | NEGative | BIPolar
<numeric_value>
<numeric_value>
<numeric_value>
<var_name>