Page:measure:sampling:scondition[:State] - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Parameter
Query response
Example
SCPI Commands

:PAGE:MEASure:SAMPling:SCONdition[:STATe]

:PAGE:MEASure:SAMPling:SCONdition[:STATe]
This command controls whether the sampling stop condition is enabled.
:PAGE:MEASure:SAMPling:SCONdition [ :STATe] OFF | ON | 0 | 1
Parameter Type
OFF or 0 boolean
ON or 1 boolean
0 | 1 <newline><^END>
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:SCON ON"
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:SCON?"
ENTER @Hp4155;A
:PAGE:MEASure:SAMPling:SCONdition:THReshold
This command sets the THReshold value to use with the NAME and EVENt to
define the stop condition of sampling measurement.
:PAGE:MEASure:SAMPling:SCONdition:THReshold threshold | MINimum |
MAXimum
Parameter Type
threshold numeric
threshold <newline><^END>
threshold is NR3 response data type.
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:SCON:THR 0.5"
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:SCON:THR?"
ENTER @Hp4155;A
5-218 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
stop condition is disabled
stop condition is enabled
Explanation
threshold value to define the stop condition of
sampling measurement.