Hcopy:item:ffeed:state; Hcopy:item:label:state - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Parameter
Query response
SCPI Commands

:HCOPy:ITEM:FFEed:STATe

:HCOPy:ITEM:FFEed:STATe
This command sets whether the printer or plotter feeds a sheet after plot or print out
by the :HCOPy:IMMediate command or :HCOPy:DATA? query.
At *RST, the value of this parameter is OFF.
:HCOPy:ITEM:FFEed:STATe OFF | ON | 0 | 1
Parameter Type
OFF or 0 boolean
ON or 1 boolean
0 | 1 <newline><^END>
OUTPUT @Hp4155;":HCOP:ITEM:FFE:STAT ON"
OUTPUT @Hp4155;":HCOP:ITEM:FFE:STAT?"
ENTER @Hp4155;A

:HCOPy:ITEM:LABel:STATe

This command sets whether the user defined comment for the plot or print out
(PRINT/PLOT COMMENT), which is defined by :HCOPy:ITEM:LABel:TEXT
command, should be plotted or printed when the :HCOPy:IMMediate command or
:HCOPy:DATA? query is sent.
At *RST, the value of this parameter is ON.
:HCOPy:ITEM:LABel:STATe OFF | ON | 0 | 1
Parameter Type
OFF or 0 boolean
ON or 1 boolean
0 | 1 <newline><^END>
5-44 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
Disable form feed function
Enable form feed function
Explanation
PRINT/PLOT COMMENT is not plotted or printed.
PRINT/PLOT COMMENT is plotted or printed.