Syntax
Parameter
Query response
Example
SCPI Commands
:SYSTem:COMMunicate:NETwork[:SELF]:USERid
:SYSTem:COMMunicate:NETwork[:SELF]:USERid
This command is one of the commands to register the 4155C/4156C network setup.
To register the 4155C/4156C network setup, enter the following commands:
•
:SYSTem:COMMunicate:NETwork[:SELF]:NAME
•
:SYSTem:COMMunicate:NETwork[:SELF]:IPADdress
•
:SYSTem:COMMunicate:NETwork[:SELF]:USERid
•
:SYSTem:COMMunicate:NETwork[:SELF]:GROUpid
This command sets your user ID.
*RST sets the value to 200. Query returns the present setting.
:SYSTem:COMMunicate:NETwork [ :SELF] :USERid id
Parameter
Type
id
numeric
id <newline><^END>
id is NR1 response data.
OUTPUT @Hp4155;":SYST:COMM:NET:SELF:USER 4156"
OUTPUT @Hp4155;":SYST:COMM:NET:SELF:USER?"
ENTER @Hp4155;A
5-320
Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
ID number. 1 to 32767.