Prog[:Selected]:State - Agilent Technologies 4155C Command Reference Manual

Example
Syntax
Query response
Example
OUTPUT @Hp4155;":PROG:NUMB A,5"
OUTPUT @Hp4155;":PROG:NUMB 'Ab',5,5,5,5,5"
OUTPUT @Hp4155;":PROG:NUMB? A"
ENTER @Hp4155;B
OUTPUT @Hp4155;":PROG:NUMB? 'Ab'"
ENTER @Hp4155;Ab(*)

:PROG[:SELected]:STATe

This command is used to set the state or query the state of the downloaded program.
The following table shows the result of setting the STATe for each of the possible
current states.
desired state
RUNNING
RUN error (-221)
CONT error (-221)
PAUSE PAUSED
STOP STOPPED
:PROG [ :SELected ] :STATe RUN | PAUSe | STOP | CONTinue
RUN | PAUS | STOP <newline><^END>
OUTPUT @Hp4155;":PROG:STAT RUN"
OUTPUT @Hp4155;":PROG:STAT?"
ENTER @Hp4155;A$
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:PROG[:SELected]:STATe
current state
PAUSED STOPPED
RUNNING RUNNING
RUNNING error (-221)
PAUSED STOPPED
STOPPED STOPPED
SCPI Commands
5-287