Page:ksweep:var1:Mode - Agilent Technologies 4155C Command Reference Manual

Example
Syntax
Parameter
Query response
Example
SCPI Commands

:PAGE:KSWeep:VAR1:MODE

OUTPUT @Hp4155;":PAGE:KSW:VAR1:EXT 0.1"
OUTPUT @Hp4155;":PAGE:KSW:VAR1:EXT?"
ENTER @Hp4155;A
:PAGE:KSWeep:VAR1:MODE
This command sets the SWEEP MODE of VAR1 for knob sweep measurement.
At *RST, this value is SINGle.
:PAGE:KSWeep:VAR1:MODE SINGle | DOUBle
Parameter Type
SINGle character
DOUBle character
SING | DOUB <newline><^END>
OUTPUT @Hp4155;":PAGE:KSW:VAR1:MODE SING"
OUTPUT @Hp4155;":PAGE:KSW:VAR1:MODE?"
ENTER @Hp4155;A$
5-154 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
single stair sweep
double stair sweep