Syntax
Parameter
Query response
Example
See also
Syntax
Parameter
SCPI Commands
:DIAGnostic:TEST:ERRor?
:DIAGnostic:TEST:ERRor?
This command returns a list of error numbers for the specified diagnostic test item.
A zero is returned if no errors are detected.
If more than seven errors are detected, only the first seven errors are returned.
This command has query form only.
:DIAGnostic:TEST:ERRor? test_number
The definitions of test_number are the same as for the :DIAGnostic:TEST:EXECute
command.
error_list <newline><^END>
error_list is a list of comma-separated error numbers.
The data type of error_list is string response data but does not contain double quote
at the beginning and end of the string.
OUTPUT @Hp4155;":DIAG:TEST:ERR? 101"
ENTER @Hp4155;A$
:DIAGnostic:TEST:EXECute
:DIAGnostic:TEST[:EXECute]
This command performs the specified diagnostic test item (test_number) of the
instrument.
This command sets the Operation Complete flag to false until the diagnostics
initiated by this command finishes. This affects the execution of the *OPC, *OPC?,
and *WAI commands.
This command does not have query form.
:DIAGnostic:TEST [ :EXECute] test_number
Parameter
test_number
numeric
5-20
Agilent 4155C/4156C SCPI Command Reference, Edition 1
Type
item number of the diagnostic test
Explanation