Hitachi Compute Blade 2000 User Manual page 512

Item Description of item
IP address A user IP address
 CHCO command
You can execute console connection to a partition or switch module. Enter CHCO to the
prompt, and press Enter key.
5713RF0 NNNNN(0)SVP> CHCO (Enter)
<<CHCO – Change console.>>
-- Console menu --
P. Start OS console session.
SW. Start switch module console session.
Q. Quit.
(P, SW, [Q]) :
Select a menu you require from the following list, and execute it.
Menu
P. Start OS console session.
Start switch module
SW.
console session.
Q. Quit
When you operate from the console terminal connected to
the serial port of the management module, a break signal
sent from the terminal software cannot reach the server
blade or switch module.
Send a break signal from the console terminal connected to
the LAN port of the management module. To connect to the
OS console, it is recommended that you use the procedure
OS Console > Server Blade Operation in Chapter 13.
Value
HTTP HTTP connection: System Web
console
HTTPS HTTPS connection: System Web
Console
Type of IP A user IP address has been
address connected via LAN
---------- Connected from a serial port.
Description
Starts the OS console.
Starts the switch module console.
Quits the CHCO command.
461
Description of value