Hitachi Compute Blade 2000 User Manual page 464

# Item
Reduction state of
9
sockets
10 Number of Physical Cores
11 Number of Failed Cores
Number of Activated
12
Cores
Mezzanine Card FRU
Information:
13
Mezzanine Card 0
Mezzanine Card FRU
Information:
14
Mezzanine Card 1
You cannot set up the planned reduction or

deconfigure CPU or DIMM below the minimum
configuration. A message, indicating that planned
reduction is not allowed, is displayed.
Planned reduction can be set only when the

power to the server blade is off.
The screenshots are of 2-blade SMP server

partition. The reduction units, each of which is a
group of CPUs or DIMMs that need to be
deconfigured or configured simultaneously, of
4-blade SMP server partition are different from
those of 2-blade SMP server partition.
Description
Shows the current reduction status of the
CPUs.
Configured : Not deconfigured.
Deconfigured : Deconfigured as planned.
Absent : Not installed.
Failed : Deconfigured due to
failure.
Shows the number of the processor cores that
are contained in the CPU.
Shows the number of the processor cores that
are deconfigured due to failure.
Shows the number of the processor cores that
are active.
Shows the FRU information of the mezzanine
card 0 per server blade in the server partition.
Shows the FRU information of the mezzanine
card 1 per server blade in the server partition.
413