Initial settings of the management
module via system console
(1) First login
1
Boot client software, such as Telnet, SSH, or Serial terminal software, of the
system console.
2
Specify 192.168.0.1 to connect the client software in Telnet or SSH, and start
the connection.
Specify the port connected to the management module for the serial
connection.
3
Fixed user account and password is set to Administrator account for the
system console at the shipment. Enter the following user account and
password to login.
User account
Password
4
When login is successful, the system console main menu will appear.
Hitachi Compute Blade 2000 Management Module
ALL RIGHTS RESERVED,COPYRIGHT (C), 2008, 2010, HITACHI,LTD.
Chassis ID
Firmware Revision : B0100-Z-2919
<< System Console Main Menu >>
SW. Start switch module console session.
(P,SW,S,X) :
5
Enter S on the system console main menu to enter the command mode.
<< System Console Main Menu >>
SW. Start switch module console session.
(P,SW,S,X) : S
[Clear the screen.]
Use EX Command to return to Main Menu.
Use HE Command to get a list of available commands.
5713RF0 00108(0)SVP>
Item
administrator
password
: 5713RF0 00108
P. Start OS console session.
S. System command mode.
X. Exit.
P. Start OS console session.
S. System command mode
X. Exit.
(Enter)
439
Setting at the shipment