Hitachi Compute Blade 2000 User Manual page 448

16 Multibit Error Check and Correct (ECC) errors
were detected on the RAID controller. The DIMM
on the controller needs replacement. Contact
technical support to resolve this issue. If you
continue, data corruption can occur. Press X to
continue, or power off the system and replace the
DIMM module and reboot. If you have replaced
the DIMM, press X to continue.
Single-bit ECC errors were detected during the
17
previous boot of the RAID controller. The DIMM
on the controller needs replacement. Contact
technical support to resolve this issue. Press X to
continue, or power off the system and replace the
DIMM module and reboot. If you have replaced
the DIMM, press X to continue.
18 Single-bit overflow ECC errors were detected
during the previous boot of the RAID controller.
The DIMM on the controller needs replacement.
Contact technical support to resolve this issue. If
you continue, data corruption can occur. Press X
to continue, or power off the system and replace
the DIMM module and reboot. If you have
replaced the DIMM, press X to continue
19 Single-bit overflow ECC errors were detected
during the previous boot of the controller. The
DIMM on the controller needs replacement. If you
continue, data corruption can occur. Press X to
continue, or power off the system and replace the
DIMM module and reboot. If you have replaced
the DIMM, press X to continue
20 Multibit ECC errors were detected on the RAID
controller. If you continue, data corruption can
occur. Contact technical support to resolve this
issue. Press X to continue, or power off the
system, replace the controller and reboot.
21 Multiple Single-bit ECC errors were detected
during the previous boot of the controller. The
DIMM on the controller needs replacement. If you
continue, data corruption can occur. Press X to
continue or power off the system, replace the
DIMM module, and reboot. If you have replaced
the DIMM, press X to continue.
22 Single-bit overflow ECC errors were detected on
the RAID controller. If you continue, data
corruption can occur. Contact technical support to
resolve this issue. Press X to continue or power
off the system, replace the controller and reboot.
Memory Error. Please check the SDRAM
23
connection. If problems persist contact Technical
Support.
24 Memory Error. Detected Unsupported RAID
Controller Memory. Contact Technical support.
Unrecoverable Error. Please check the SDRAM
25
connection. If problems persist contact Technical
Support.
Message
397
Description
Errors have occurred in the cache memory of the
disk array controller. When this message is
displayed, contact your reseller or call
maintenance personnel.
An error occurred on the disk array controller
memory. When this message is displayed, contact
your reseller or call maintenance personnel.