Hitachi Compute Blade 2000 User Manual page 460

# Item
13 On-board NIC (*7)
14 Mezzanine (*7)
PCIe Slot/PCIe Switch
15
(*7)
PCI Express Auto
Deconfiguration
16
RAS Feature
17
Deconfigured Mode
Set All EFI Settings to
18
Their Defaults
19 Reset
20 Modify
(*1) For EFI firmware version 07-43/08-43 or later on X57A2, you can specify LOM or PFM
for the value of Processor Error Mode. PFM can be specified only with Window
Server 2012 or later. But for redundancy configuration with the system, do not change
from the default value LOM. For model other than X57A2, EFI firmware version later
than 07-43/08-43, and OS other than described above , do not change the default
value: LOM for Processor Error Mode.
(*2) This function is available only with BMC firmware version 04-48 or later, 06-01 or later,
but not available with server blade model X57A1.
(*3) When using VMware with EFI firmware version earlier than 03-12, do not change the
value of Memory RAS Mode: The Default value "Lockstep Channel Mode" should be
fixed.
(*4) To use this function, BMC firmware version 04-73 or later, 06-01 or later, or EFI
firmware version 07-51/08-51 or later is required. With server blade X57A1 model,
however, this function is not available.
(*5) When using Windows Server 2003 R2 with X57A1/X57A2 model to which an I/O slot
expansion unit is connected, select Legacy as a value for PCi Error Handling Mode.
(*6) If the BMC firmware version is 04-32 or earlier, the default value of this item is PCIe
Error Isolation. If the BMC firmware version is 04-33 or later, 06-01 or later, the
default value is Legacy.
(*7) To use this settings on the server blade X57A1/X57A2 model, BMC firmware version
04-32 or later, 06-01 or later, must be installed on the server blade.
Description
Legacy (Default): EFI does not isolate PCI
Express failure.
OS AER: OS performs Advanced Error
Reporting (AER). Available only for OS that
supports AER.
Disables or enables PCI Express Error
Isolation for the on-board NIC.
Disable (Default) / Enable
This setting is effective only if PCI Error
Handling Mode is set to PCIe Error Isolation.
Disables or enables PCI Express Error
Isolation for mezzanine cards.
Disable / Enable (Default)
This setting is effective only if PCI Error
Handling Mode is set to PCIe Error Isolation.
Disables or enables PCI Express Error
Isolation for PCIe slots and PCIe switches.
Disable / Enable (Default)
This setting is effective only if PCI Error
Handling Mode is set to PCIe Error Isolation.
Disables or enables PCI Express Auto
Deconfiguration.
Disable (Default) / Enable
Disables or enables the processor and memory
deconfiguration (or reduction) that is executed
when a component fails.
Disable / Enable (Default)
Restores the EFI Default settings. All the EFI
settings, including the settings #2 to #16 are
set to the Default.
Cancels the edited settings.
Validates the edited settings and moves to the
confirmation screen.
409