External Interface For The Management Module - Hitachi Compute Blade 2000 User Manual

External interface for the management
module
LAN port (MGMT0)
for the system console
LAN port (MGMT1)
for the system console
Port number
LAN port (MGMT0) Port for connecting to the management network:
LAN port (MGMT1) Port for connecting to the management network: This is not
LAN port (MAINT)
Serial Port
Prepare the following items for connection with the MAINT
port:
A terminal for the system console

Unshielded Twist Pair cable (UTP) cable: UTP-5 or better

Client software: HyperText Transfer Protocol (HTTP), Telnet, or Secure SHell

(SSH)
Connect this port at the initial setting.
available at the initial installation. See "Setting the Connection
Method" in Chapter 13 for details.
Dedicated port for maintenance. Only maintenance personnel can
use this port. Any user cannot use this.
Serial port for the system console: used for maintenance when a
local area network (LAN) port is not available.
430
LAN port (MAINT)
for the system console
Serial port
for the system console
Description