Hitachi Compute Blade 2000 User Manual page 470

Next, enable PXE booting for LAN1 in the same manner.
Figure 5-37: Setting LAN1 PXE enabled
To enable PXE booting for LAN2, perform the setting in the same manner. You can
enable PXE for LAN1 and LAN2 respectively or simultaneously.
Figure 5-38: Setting LAN2 PXE enabled
After changing settings, make sure to select "Save Changes and Reset" or "Save
Changes" on the Save & Exit
This is the last item that can be set on the Advanced menu.
Be sure not to change other settings because EFI might fail to restart.
menu.
419