Security Menu - Hitachi Compute Blade 2000 User Manual

Security menu

The Security menu is for setting the administrator or user password.
You will need to input a password, which you have set, at the timing shown in the
table below.
Administrator
#
password
1

2

3
[]: The password is set; [-]: The password is not set.
Any password can be set for a user.
When you set a password, it is always necessary to enter the password for
authentication while booting the server module.
When you set the N+M cold standby, HA, or automatic OS boot, do not set a
password. Otherwise, the password authentication interrupts switching systems or
booting modules.
Figure 5-46: Security menu
User
password

-
-

426
Request for password authentication
While a server blade is being booted
When you enter the EFI Setup screen
While a server blade is being booted