Hitachi Compute Blade 2000 User Manual page 452

65 There are offline or missing virtual drives with
preserved cache. Check the cables and ensure
that all drives are present. Press any key to enter
the configuration utility.
66 Incompatible secondary iButton present! Please
insert the correct iButton and restart the system.
Press any key to continue but OEM-specific
features will not be upgraded.
67 Upgrade Key Missing! An upgrade key was
present on a previous power cycle, but it is not
connected. This can result in inaccessible data
unless it is addressed. Reattach the upgrade key
and reboot.
FW Flash in Progress. Please Reset system after
68
X minutes.
Serial Boot ROM (SBR) device is corrupt or bad.
69
Please contact Technical Support.
Message
401
Description
No virtual drive is found. When this message is
displayed, contact your reseller or call
maintenance personnel.
iButton is incorrect. When this message is
displayed, contact your reseller or call
maintenance personnel.
Any upgrade key is not supported. When this
message is displayed, contact your reseller or call
maintenance personnel.
Firmware is being written. Restart the system X
minutes later.
A Serial Boot ROM (SBR) is faulty. When this
message is displayed, contact your reseller or call
maintenance personnel.