Save & Exit Menu - Hitachi Compute Blade 2000 User Manual

Save & Exit menu
Use the Save & Exit menu to save changes or to restore changed settings to the
Defaults.
The following table describes the items in the Save & Exit menu.
#
1 Save Changes and Exit
2 Discard Changes and Exit
3 Save Changes and Reset
4 Discard Changes and Reset
5 Save Changes
6 Discard Changes
7 Restore Defaults
8 Save as User Defaults
9 Restore User Defaults
 Boot override
Boot Override on the Save & Exit menu allows you to boot the system from a
specific device, disregarding the boot path set as Boot Option #1.
Unless otherwise specified, Boot Override would not normally be used.
Figure 5-47: Save & Exit menu
Item
Saves changes and exits the Setup utility. Boots
the system from the device set in the boot path.
Discards changes and exits the Setup utility.
Boots the system from the device set in the boot
path.
Saves changes and restarts the system.
Discards changes and exits the Setup utility.
Restarts the system.
Saves changes.
Discards changes.
Restores settings to the system Defaults.
Saves settings as user Defaults.
Restores settings to the user Defaults.
427
Processing