Hitachi Compute Blade 2000 User Manual page 457

 Power and LEDs
This screen shows the power and LED status of the server partition. You can control
the power status and reset of the server partition on this screen.
# Item
1 Refresh
2 Power Status
3 Power-on
4 Force Power-off
5 Hard Reset
6 NMI
7 Hardware Memory Dump
8 LID On
9 LID Off
10 LED Status
Description
Reloads the information.
Shows the current power status of the server
partition.
OFF: The power of the server partition is off.
ON: The power of the server partition is on.
OFF (Power-on is disabled): The power cannot
be turned on due to the power failure.
Turns on the power of the server partition.
Turns off the power of the server partition
without OS shutdown. Shutdown on the OS
screen or use the SC function to turn off the
power.
Hardware resets the server partition. Enabled
when the server partition power is on.
Generates an NMI signal. The dump process
will start if the dump function of the OS is
configured. Enabled when the server partition
power is on.
Performs hardware memory dump of the server
partition.
Turns on LID (Location ID Lamp).
Turns off LID (Location ID Lamp).
Shows the status of the LEDs on the front
panel of the server partition.
Location ID Lamp (LID)
POWER Lamp (PWR)
ERROR Lamp (ALM)
CONDITION Lamp (CND)
Primary Lamp (PRIM)
For color and description of each LED, see
406