Basic Operation - Hitachi Compute Blade 2000 User Manual

8 Backup and restore the configuration
Command
DC
UBR

Basic operation

To enter a command to the management module, press Enter.
When an option in parentheses is displayed, characters in parentheses can be
entered.
Q means that the screen goes to the prompt or returns to the previous menu.
Unchange means that you do not change it.
Input characters in brackets means that you can input the value by just pressing Enter.
Prompt is displayed in the following composition.
Chassis ID (the slot number of the management module that
currently logs in)SVP>
Example: the slot number is 0 of the management module that logs in with
Chassis ID 5713RF0 NNNNN:
5713RF0 NNNNN(0)SVP>
 EX command
5713RF0 NNNNN(0)SVP> EX (Enter)
[the screen is cleared.]
<<System Console Main Menu>>
P. Start OS console session.
SW. Start switch module console session.
S. System command mode.
X. Exit.
(P, SW, S, X):
To disconnect, select X. Exit in this screen.
Description
Restores to the default setting at the shipment
Backups and restores each module configuration.
457
See page:
643
645