Show Lacp - Dell C9000 Series Reference Manual

Related
Commands

show lacp

Display the LACP matrix.
C9000 Series
Syntax
show lacp port-channel-number [sys-id | counters]
Parameters
port-channel-
number
sys-id
counters
Defaults Without a Port Channel specified, the command clears all Port Channel counters.
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
• show lacp — displays the LACP information.
• show interfaces port-channel
groups.
Enter a port-channel number. The range is from 1 to 128.
(OPTIONAL) Enter the keywords sys-id and the value that
identifies a system.
(OPTIONAL) Enter the keyword counters to display the LACP
counters.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— displays information on configured Port Channel
Link Aggregation Control Protocol (LACP) 1357