Ip Address; Ip Address (Out-Of-Band); Ip Address-Conflict-Detect Run; Ip Address Dhcp (Interface Configuration) - Dell N1100-ON Reference Manual

Command
ip igmp snooping querier
election participate
ip igmp snooping querier
query-interval
ip igmp snooping querier
timer expiry
ip igmp snooping querier
version
show ip igmp snooping
querier
a. For the meaning of each Mode abbreviation, see
IP Addressing
Command
clear host
clear ip address-conflict-
detect
interface out-of-band

ip address

ip address (Out-of-Band)

ip address-conflict-detect
run
ip address dhcp (Interface
Configuration)

ip default-gateway

ip domain-lookup

Description
Enables the Snooping Querier to participate in
the Querier Election process when it discovers
the presence of another Querier in the VLAN.
Sets the IGMP Querier Query Interval time.
Sets the IGMP Querier timer expiration period. GC
Sets the IGMP version of the query that the
snooping switch is going to send periodically.
Displays IGMP Snooping Querier information. PE
Mode
Description
Deletes entries from the host name-to-address
cache.
Clears the address conflict detection status in
the switch.
Enters into OOB interface configuration mode. GC
Configures an IP address on an in-band
interface.
Sets an IP address for the out-of-band interface. IC
Triggers the switch to run active address conflict
detection by sending gratuitous ARP packets for
IPv4 addresses on the switch.
Acquires an IP address on an interface from the
DHCP server.
Defines a default gateway (router).
Enables IP DNS-based host name-to-address
translation.
Types.
Dell EMC Networking CLI
a
Mode
VC
GC
GC
a
Mode
PE
PE
IC
GC
IC
GC
GC
115