Capture Bgp-Pdu Neighbor; Capture Bgp-Pdu Max-Buffer-Size - Dell Force10 S4810P Reference Manual

capture bgp-pdu neighbor

Enable capture of an IPv4 BGP neighbor packet.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax capture bgp-pdu neighbor ipv4-address direction {both | rx |
tx}
To disable capture of the IPv4 BGP neighbor packet, use the no capture bgp-pdu
neighbor ipv4-address command.
Parameters
ipv4-address
direction {both |
rx | tx}
Defaults Not configured.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Version 7.5.1.0
Related

capture bgp-pdu max-buffer-size

Commands
show capture bgp-pdu neighbor
capture bgp-pdu max-buffer-size
Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax capture bgp-pdu max-buffer-size 100-102400000
Parameters
100-102400000
Defaults 40960000 bytes.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Enter the IPv4 address of the target BGP neighbor.
Enter the keyword direction and a direction—either rx for
inbound, tx for outbound, or both.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
– specifies a size for the capture buffer.
– displays BGP packet capture information.
Enter a size for the capture buffer.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
369